Google Триизмерна галерия Архитект на сгради SketchUp
български | Вход
Google Триизмерна галерия
The Hale Boggs Memorial Bridge « Назад към модела
Tuesday, 2010, June 1  Приет  от SnowTiger Подайте сигнал за нарушение на правилата
  Тази версия
Тази версия на модела
Предишна версия
Предишната версия на модела
Промени в модела    
 
Визуализация на изображението
Визуализация на изображението
Файл на SketchUp 7 Luling Bridge.skp 1 МБ Luling Bridge.skp 1 МБ
Файл на SketchUp 6 Luling Bridge.skp 1 МБ Luling Bridge.skp 1 МБ
Описателни промени    
Описание The Hale Boggs Memorial Bridge, also known as the Luling Bridge, was the first major cable stayed bridge to be built in the United States. The bridge is somewhat unusual for a cable stayed structure in that is has very few stay cables. In addition, the deck is built like a box girder, which is a much more robust structure than typically seen on suspended bridges. The entire bridge has nearly two miles of elevated structure. The suspended spans include a 1,200 foot span over the river navigation channel, plus side spans of 495 feet and 508 feet. Including the two approach spans and the box girder structure it totals 2,744 feet long. The bridge has 2, 400 foot tall towers and a road deck with a clearance 155 feet from the sea-level water below. The bridge at Luling is supported by 72 stay cables arranged in 24 groups of 4 cables. Woven from 1/4-inch diameter wire, each stay cable consists of between 103 and 307 strands of wire, coated with a protective polyethylene layer that ranges between 1/4-inch and 1-inch thick. Due to a defect in the protective coating which resulted in premature corrosion, the stay cables were replaced in 2009 at an estimated cost of $20-million to $30-million. The Luling Bridge was designed and built to survive hurricane force winds, as demonstrated by Hurricane Katrina hit in 2005. Built 1983 at a cost of $135 million Dimensions Length of largest span: 1,234.6 ft. Total length: 2,744.4 ft. Deck width: 76.4 ft. The Hale Boggs Memorial Bridge, also known as the Luling Bridge, was the first major cable stayed bridge to be built in the United States. The bridge is somewhat unusual for a cable stayed structure in that is has very few stay cables. In addition, the deck is built like a box girder, which is a much more robust structure than typically seen on suspended bridges. The entire bridge has nearly two miles of elevated structure. The suspended spans include a 1,200 foot span over the river navigation channel, plus side spans of 495 feet and 508 feet. Including the two approach spans and the box girder structure it totals 2,744 feet long. The bridge has 2, 400 foot tall towers and a road deck with a clearance 155 feet from the sea-level water below. The bridge at Luling is supported by 72 stay cables arranged in 24 groups of 4 cables. Woven from 1/4-inch diameter wire, each stay cable consists of between 103 and 307 strands of wire, coated with a protective polyethylene layer that ranges between 1/4-inch and 1-inch thick. Due to a defect in the protective coating which resulted in premature corrosion, the stay cables were replaced in 2009 at an estimated cost of $20-million to $30-million. The Luling Bridge was designed and built to survive hurricane force winds, as demonstrated by Hurricane Katrina hit in 2005. Built 1983 at a cost of $135 million Dimensions Length of largest span: 1,234.6 ft. Total length: 2,744.4 ft. Deck width: 76.4 ft.
Географско местоположение

 

Визуализация на страницата с подробности за модела

Преглед на страницата с подробности за модела


Portions ©2013 Trimble Navigation Limited - Portions ©2013 Google - Google's Privacy Policy - Trimble's Privacy Policy - Условия за ползване - Trimble Home - Начална страница на Google - Помощ - Форум